UPVC Window Handle Replacement

Replacing a damaged or UPVC Window Handle Replacement broken window handle is a easy task and with the right tools it can be done quickly. It's important to know what kind of handle you have and its spindle size before you purchase an alternative.

Older uPVC windows use cockspur window handles which have a spur that protrudes to secure a wedge-shaped cockspur striker plate. They can be right or left-handed and have to match when replacing.

What kind of lock or handle do you have? I have

There are many kinds of window handles made from upvc and UPVC Window Handle Replacement locks, each having their particular advantages and uses. The kind of handle you choose will determine the ease to open your windows and if the locking mechanism functions in the way you want it to. As time passes, and with regular use, the upvc handles on your windows may get worn out and damaged. This makes them less secure and less effective. In some instances they might even be completely removed. It is crucial to fix the handles on your window made of upvc immediately if you begin to notice they are falling off. This will help prevent burglaries and will keep your home safe.

It's an easy task that almost anyone can do. You will need a few basic tools, but with appropriate knowledge, it's simple and should only take a couple of minutes. You must be aware of the type of lock or handle you have on your window. This will help you select the appropriate replacement.

Inline Espagnolette Handles

They are usually found on the outside of the window. They are flat and feature a latch which engages the locking mechanism of the window frame. Inline upvc handles also come with a spindle that goes through the center of the handle, and into the window frame to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames. They have a distinctive, hook-shaped design. Cockspur handles are attached to the window frame by a single screw and are less secure than other varieties of window handle.

Tilt and Turn Handles

As opposed to the other handles made of upvc the tilt and turn handles can be rotated to open the window, and turned inwards to allow to allow ventilation. They have a 7mm spindle in the back and are available both in left and right-handed versions.

It is crucial to determine the size of the spindle when purchasing a replacement upvc handle. Not all are exactly the same size. To test the length of your upvc handle, simply drop something into the middle of the hole, and then measure the distance it travels before meeting an obstruction. This is the maximum spindle size that will fit in your windows.

What is the spindle?

uPVC window handles function similar like doors, turning the handle to activate an internal latch within the frame. The window then opens and closed. These handles can be damaged, especially if frequently used or exposed to harsh environments. This could mean that you have to replace window handles your uPVC handles for windows as they might not operate the window in a proper manner in the future.

There are a variety of uPVC handles that are available, including Espag, Cockspur and Spaded handle options. They are made in a variety of ways to fit into uPVC frames. Each handle style uses a different spindle to lock the window mechanism. This is why it is important to know what kind of handle you have installed on your uPVC window so you can find the right replacement.

The base of the handle will tell you what kind of uPVC it is. A snap-in cover is over the screw that holds the handle's base in position. Take it off and you should be able to see the second screw on the opposite side of the base section of the handle. Once both screws are removed you should be capable of pulling the handle away from the uPVC window.

After you have removed the uPVC window handle, you have to carefully remove the spindle you have removed from the locking mechanism. Take note of the length of the spindle. You'll need purchase a new one that is the same length as the original handle and locking device.

The spindle wears out and cannot operate the locking mechanism. This can be due to damage caused by constant use, a loosening of the locking mechanism or even corrosion over time. If this occurs, you will have to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I take off the old handle?

Over time and through everyday usage, window handles could be damaged or destroyed, and when this happens, it is important to repair them as soon as possible to ensure the security of your home. It is easy to replace a worn or damaged handle. The job can be accomplished in under a minute without the need for special tools.

To remove the old handle, you must first remove the screw that is located at the bottom of the handle. Once this is removed the handle will be pulled away from the base section. A second screw will be located at the base of the handle. It can also be removed. When both screws are removed the handle can be removed from the base section of the window.

Once the old handle has been removed, take the new handle and line up the fixing holes with the holes currently in the window frame. If there is a sticker or cap on the new handle, take it off it if needed and screw the handle into place. It is essential to ensure whether the handle functions after it is installed. Turn the handle and make sure the lock mechanism is working.

Espag handles have an elongated spindle that extends from the handle and slot into a multipoint locking mechanism inside the window frame. Cadenza windows come with blades with cut-outs that slot into the lock mechanism while Cockspur handles have an extended nose that hangs over the frame's outer or the transom bar cross member inside the window.

Once you have the new handle in place, insert the spindle into the window lock and then tighten it. Once the handle is firmly fixed then replace the snap-in cover and screw cap (if necessary). The handle is now ready for use by opening and closing the window several times to ensure that it works properly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't difficult and the process is actually very simple. All you require is a screwdriver and small amount of patience. First, make sure that the handle that you are replacing is unlocked. Then, remove any screws visible. You could also replace them with screw caps. After the handle has been removed and you are ready to take an outline of the length of the spindle that extends from the back of the handle. This is crucial because it will determine the kind of handle you will need to purchase.

Espagnolette handles are the most popular kind of handle that is used on uPVC windows. They have a spindle which is inserted into the handle and operates a locking mechanism inside the frame of the window. Once the handle is turned it releases the latch on the window and allows it to open. With time and regular use, espagnolette handles may become damaged or impaired which is why it is essential to locate a replacement.

Cadenza handles are a kind of uPVC handle that is commonly used with tilt and turn windows. They have a protruding knife that is operated by a multi-point locking mechanism within the window. They are usually more secure than espagnolette handles as they can only be opened from the inside. You can replace them using the same method as you would do for handles made of espagnolette however, make sure that the new handle is not angled and flat.

After you have picked the correct handle, simply align the new handle with the existing screw holes prior to screwing it in place. Then, put the screws back on and make sure the new handle is working correctly. You can do this by dragging the handle back and forth from the locked position to the unlocked several times. If you encounter any issues, it could be worthwhile contacting a professional to determine if they can help resolve the problem. They can offer advice on how to fix the issue in a quick and effective way.