UPVC Window Handle Replacement

It's simple to replace a broken window handle using the appropriate tools. It is important to identify the kind of handle you have and its spindle size before purchasing an alternative.

Older uPVC windows use handles with cockspurs, which have spurs that protrude to secure a wedge-shaped cockspur striker plate. These can be either left or right-handed and need to be matched when replacing.

What kind of lock and handle do I have?

There are many windows locks and handles made of upvc, each with its own advantages and purposes. The type of handle you have will determine if your locking mechanism is effective and also if it is simple to open the windows. With time and regular usage, the window handles made of upvc may become damaged or worn out, making them less secure and effective. In some instances they might even disappear completely. If you notice that your upvc window handles have fallen off, it is important to fix them as soon as you can. This will prevent possible break-ins and will keep your home secure.

Luckily, replacing your window handles made of upvc is a simple task that is achievable by anyone. You'll need a few basic tools, Window Handle Replacement but with the appropriate knowledge, it's simple and should take only a couple of minutes. To get started, you will need to determine the kind of lock and handle that you have on your upvc window to help you identify the best double glazed replacement windows.

Inline Espagnolette Handles

They are typically found on the sides of the window. They are flat in design and come with a latch that connects to the locking mechanism of the window frame when it is turned. Inline upvc handles come with a spindle that runs through the middle of the handle into the window frame in order to operate the latch.

Cockspur Handles

They are usually found on older uPVC windows and have a distinctive hook-shaped design. Cockspur handles are fitted with a single screw that secures the handle to the window frame and aren't as secure as other kinds of window handles.

Tilt and Turn Handles

The tilt and turn handles are different from other upvc handles in that they can be turned for Window Handle Replacement opening the window, and then tilted into the window to ventilate. They typically feature a 7mm spindle on the back of the handle and are available in both left and right-handed versions.

It is essential to know the size of the spindle when purchasing a replacement handles made of upvc. Not all of them are the exact same size. Drop something in the middle of the hole to check the length. This is the maximum spindle size that will fit into your windows.

What is the spindle?

uPVC window handles function similarly as doors. By turning the handle, you will be able to activate a latch inside the frame. The window can then be opened and shut. The handles could be damaged, particularly if they're used frequently or exposed to harsh conditions. You may have to replace the handles on your uPVC window if they're not functioning properly.

There are many different kinds of uPVC handles to choose from, comprising Espag, Cockspur and Spaded handle options. These handles are made in a variety of ways to fit into uPVC frames. Each handle type utilizes a different spindle to lock the window mechanism. It is important to identify the type of handle you have installed on your uPVC windows to ensure that you replace it with a suitable one.

The base of the handle will inform the type of uPVC it is. A snap-in covers should be over the screw that holds the handle's base in position. Once you remove this and you'll be able to see the second screw that holds the handle base in position. Once both screws have been removed then you should be able to take the handle out of the uPVC.

After removing the uPVC handle, carefully unscrew it from the locking mechanism. Take note of the length of the spindle. You'll need buy a replacement of the same length as the handle that was originally used and locking device.

The spindle wears out and cannot operate the locking mechanism. This could be due to corrosion, damage caused by frequent use, or an unreliable locking mechanism. If this happens, it is necessary to replace the window handle and the locking mechanism to restore the full functionality to your uPVC windows.

How do I take off the handle that was previously attached?

Window handles can be damaged or even broken over the course of time. It is crucial to fix them as quickly as you can to ensure your safety. It is easy to replace a damaged or worn handle. The task can be completed in under an hour without the need for any special tools.

To remove the handle, first remove the screw at the bottom of the handle. After this screw is removed, the handle will be pulled away from the base section. Another screw will be located at the bottom of the handle. This can also be removed. After these two screws have been removed, the handle can be removed from the base of the window.

Once the old handle has been removed, you can take the new handle and line up the fixing holes with the holes currently in the window frame. There might be a small cap or sticker on the new handle, so remove them if needed and then screw the handle in its place. Once the handle is in place it is essential to check that it is working by turning the handle and ensuring that the lock mechanism activates.

Espag handles come with spindles that protrude out of the handle and slot into the multipoint locking mechanism on the frame of the window. Cadenza windows feature a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that is able to hook over either the outer frame or transom bar cross-member within the window.

After you have put in the new handle, slide the spindle into the window lock and tighten it. Once the handle is securely fixed then replace the snap-in cover and screw cap (if applicable). Once the handle is in use, you can open and close the window a few times to make sure it is working correctly and securely.

How do I install the new handle?

Switching your uPVC window handle isn't difficult, and the process is quite simple. All you need is a screwdriver and a little bit of patience. The first thing to do is ensure that the handle is not locked and then take out any screws that are visible. you can also replace them by screw caps if you need. After removing the handle you will need to note the length of the spindle which extends from the back. This is important as it will determine the type of handle you'll need to purchase.

Espagnolette handles made of uPVC are the most sought-after type of handle. They feature a spindle that is connected to the handle and operates an internal locking mechanism within the frame of the window. When the handle is turned, it releases the latch on the window, allowing it to open. In regular use and time, handles made of espagnolette can become damaged.

Cadenza handles are a form of uPVC handle that is commonly employed with tilt and turn windows. They have a protruding knife that is operated by a multi-point locking mechanism within the window. They are more secure than the espagnolette handles since they only open from the inside. They can be replaced with the same method as espagnolette handles, however you must ensure that the new handle has an angled blade instead of flat ones.

Once you have determined the correct handle to purchase You can simply line up the new handle with the existing screw holes, and then screw it in the appropriate position. You should then put the screws back on and test that the new handle functions correctly. You can perform this by dragging the handle back and forth from the locked position to the unlocked for a few times. If you experience any issues, it could be beneficial to speak with a professional to determine if they can assist you in solving the issue. They can provide advice on how to solve the problem in a timely and effective manner.