How to Replace a Saab 9-3 Key

The saab 9-3 key programming 9-3 is a great car that provides a lot of driver appeal. It has a powerful engine and excellent visibility. It has a very high safety rating.

It is essential to have two keys that are compatible for your vehicle. It is costly to replace a key in the event that you lose it.

How to replace the ignition Key in the Saab9-3

If your car's key doesn't turn in the ignition you must replace it. This guide will guide you through how to do it on the Saab 9-3. You will need to replace the key, buy a new reprogrammable cell, and then purchase a new casing for your key-fob.

The majority of modern Saab models utilize transponders instead of a traditional key to unlock the vehicle and allow it to start. The reprogrammable batteries inside the key-fob will eventually expire, and they will not be able to hold charge. This is especially relevant if you use the same key for the lock you have.

The good thing is that the battery is easily replaced by a professional locksmith. You can also do it yourself if have the right tools and a bit of patience. The first step is to separate the key-fob. Insert flatheads into the slot that is in the middle of your case. You must take your time, replacement Saab car Keys as the plastic is thin and can be damaged easily.

After the case has been opened and you are able to prepare the new key by combining the lower section of the previous key with the transponder and banana on the new key. This will ensure that the new key is linked to the CIM properly, which could make a big difference when replacing the sole key for your saab key fob 9-3.

How to replace the ignition Key on a Saab 900

Unless you have two keys, you'll have to take off the dashboard and steering wheel to gain access to the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you can take off all trim pieces and dashboard pieces that surround the steering wheel. After the dashboard is removed, you can push a screwdriver through the opening in the back of the ignition switch and remove it.

The ignition cylinder is equipped with a key lock that can prevent the vehicle from starting if you don't have the key inside it. If the ignition switch isn't working properly, check whether the key is inside the lock or inside the barrel. You should also rotate your keys and keep them clean to avoid bending.

Saab cars differ from other vehicles because they do not have traditional keys made of metal. Instead, the car detects the electronic signals from the key fob through a chip that is specifically designed for it.

If you lose only one working key fob your dealer will charge an extra fee to replace your computer module (also called the CIM). We can reprogram the EEPROM on your computer to make it accept new keys without having to replace it. This will save you over 50% of what the dealer charges! We call it the SAAB KEY PROGRAM. Find out more about it here!

How to Replace the Ignition Key in a Saab9-5

The metal part of the classic Saab keys is easy to copy and doesn't represent a significant risk to theft of vehicles. The electronic component of the key-fob is equipped with an embedded chip that can identify the car when the key is put in the ignition switch.

Saab has relied on the technology of this anti-theft system for over 10 years. It's not as effective as an actual lock on the door, but it does make the theft of your car much harder. That's why every Saab owner should always keep a spare key on hand.

The majority of new Saabs come with two keys. However, they can be purchased from an dealer by using a handheld device referred to as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is for NG 9-3 cars, that have newer, more modern features that require a separate key-fob and operate using a different procedure.

If you lose all keys, the dealer will replace your CIM or TWICE modules and bill you the cost of replacement saab car keys (Kbphone Co`s blog). We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.

How to replace the ignition Key in the Saab XC90

If your SAAB 9-3 key fob starts having issues turning the barrel of the lock it's possible that it's time to replace it. The process is fairly simple and doesn't require you to visit a dealer. Instead, you can do it yourself at home using a few simple tools.

In the beginning, you'll need to prepare the new key. Before you begin, disable the anti-theft feature by placing blocks under your rear wheels and releasing your handbrake. Insert the key in the ignition and then turn the key to the "on" position. This will activate the accessories however, it won't start the engine. Repeat this process 5 times, and then leave the key on the "on" position.

You'll need to purchase an additional case for your key fob. They can be found in most auto parts stores and are usually inexpensive. You can purchase them without electronics based on the model.

To open the case to open the case, gently push the flathead screwdriver into the slot in the middle. After you've separated the case, you'll have access to all of the internal electronics. Use a flathead screwdriver to gently pull out the electronics.