Window Repairs

Window repairs can save homeowners money and make their homes warm. In the event of severe damages, like broken glass or a damaged frame, window replacement may be necessary.

Many other issues are fixable to extend the lifespan of windows. The most frequent issues are:

Broken or cracked panes

If it's an unintentional rock that was tossed by your lawnmowers or a tree's branch blown by strong winds, cracked window glass isn't just visually unappealing, but also can result in higher electricity bills as the broken pieces let cold air to enter your home. Luckily, it's typically simple to repair windows with damaged panes.

Start by carefully removing glass with gloves and safety sunglasses. You may have use a utility knife to loosen old glazing compound or putty around the frame's edges. Then, use a gentle cloth or paper towel to clean the surface of both the glass and the frame's wood.

Once the area is clean and dry, apply a waterproof silicone caulking around the frame's perimeter. This will prevent water from leaking into the frame through the crack and result in further damage.

A crack that is severe in Double glazing Repairs Mitcham-paned glass can affect the gas between the panes, rendering your windows less insulative. If the crack is so severe that it is threatening the structural integrity of the window or the pane inside is not there, you may need to contact a professional.

Cracks caused by thermal stress can occur when there's an extreme difference in temperature between the inside and outside of your home, which causes the glass to expand or contract. If this happens across two windows it's best to replace the window rather than trying to repair it.

Clear tape can be used to seal cracks in windows that are not yet ready to be replaced. It also keeps out bugs and cold wind. You can also cut a nylon stocking large enough to cover the entire crack and glue it with duct tape. This isn't a permanent solution however it can be useful in a pinch and keeps cold air and insects from entering your home. If your windows are older and you're beginning to see cracks in the glass, it's recommended to consult with your local window company to determine if replacing the entire window could be a better solution for you.

Rotten Wood

Wood rot is among the most frequent problems that plague windows. It can ruin a house's appearance and create a security danger. It is possible to repair the wood that has rotted. The first step is to make sure that the root of the rot has been addressed. This can be done by checking for leaks in the roof and gutters that aren't functioning cracking caulking, and any other areas that allow water to get into the wood.

The next step is to remove the rotten parts of the window frame. This can be done with an axe, double glazing repairs Mitcham a claw hammer, or rasp. After you have removed the decayed wood, you'll need to replace it with new wood. It is recommended to use pre-treated wood for this project as it is more resistant to rot. If you are not able to replace the timber that has rotted you can apply wood filler and hardener to reinforce the damaged area. The majority of hardware stores have this type of product. Follow the directions on the label of the product to ensure the most effective results.

Once you have repaired the rotten areas of the windowsill, it's crucial to safeguard the newly repaired area. This can be done by applying an water-resistant wood sealant. Sikkens for instance is a fantastic product to apply.

You can also use an epoxy filler that is two-part to shield the wood from further damage. It is easy to apply and leaves a beautiful finish. It is essential to follow the directions on the label. After the epoxy filler dries you can sand the wood's surface. It is best to begin with a rough grade of sandpaper, and then progress to a smoother grade.

You don't want to expose your damaged area to more moisture. It is recommended, therefore, to protect the surface you have repaired with an oil-based prime that will protect it from moisture. After that, you can apply the waterproof wood sealant.

The W won't open

There are many reasons windows don't open. The house could have settled or the wooden frames may have warped in rainy weather. Someone might have also nailed them shut for security. But with some patience and the right tools, many windows that are locked can be opened.

Gunk or debris that has accumulated can be a major reason of a window not opening. Grime and dirt build up on sliding tracks, hinges, and locks over time, notes Acme Glass. Additionally, hardware made of metal can be rusty when it comes in contact with humidity or direct sunlight. Spraying grease on these areas will help prevent oxidation, and ensure that your windows are operating properly.

Stuck windows may be caused by an unintentional break or loosening of the pulleys used to lift and lower the window. These components can lose their tension and get blocked particularly if the window is located two or more stories above the ground.