Window Repairs

Window repairs can help homeowners save money and make their homes warm. In the event of severe damages such as broken glass or a cracked frame, window replacement may be necessary.

But many other issues can be addressed to extend the lifespan of your windows. Common problems include:

Cracked or Broken Panes

Whether it's an errant rock that was tossed by your lawnmowers or a tree's branch blown by high winds, damaged windows are not just unattractive but can lead to more expensive electricity bills because the broken pieces let cold air to enter your home. It's fairly easy to fix windows with damaged panes.

Start by carefully removing the glass with gloves and safety glasses. You may need use a utility knife to loosen old glazing compound or putty around the frame's edges. Then, clean the surface of the glass and the wood of the frame using a soft cloth or paper towel.

After cleaning the area, apply silicone caulking that is waterproof to the frame's edges. This will stop water from getting into the frame through the cracks and causing further damage.

If you have double-pane glass cracks that are not treated properly could weaken the gas layer between the panes and make your windows less insulative. If the crack is significant enough to threaten the integrity of the glass or in the case of an inner pane that's totally missing, it's the time to call a professional.

Cracks in thermal stress can occur when there's a significant difference in temperatures between the outside and inside of your home, causing the glass to expand or contract. If the cracks are on two sides of a window, it is recommended to replace it instead of attempt to repair it.

If your windows are cracked and not quite ready to be replaced Clear tape can do a decent job of securing the crack and preventing the entry of bugs and cold air. You can even cut an area of nylon stocking or tarp that's large enough to cover the crack and stick it to the wall using duct tape. It's not an end-to-end solution, Window doctor near Me but it can keep insects and cold air away from your home. If your windows are older and you're starting to notice cracks in the glass It's an excellent idea to talk with your local window company to determine if replacing the entire Window doctor near me - Www.repairmywindowsanddoors.co.uk - could be the best alternative for you.

Rotten Wood

Wood rot is one of the most common problems with windows. It can alter the appearance of a home and can also be an hazard to safety. It is, however, possible to repair wood that has rot. The first step is to ensure that the cause of the rot has been dealt with. Examine for leaks in the roof and other areas where water can enter the wood.

The next step is to take off the rotten parts of the window frame. This can be done using a rasp, chisel or claw hammer. After you have removed the decayed wood, you'll have to replace it with new wood. Pre-treated wood is suggested for this project since it will resist rot. If you cannot replace the damaged timber you can apply filler and wood hardener to reinforce the damaged area. This kind of product will be available at a majority of hardware stores. To achieve the best results, adhere to the instructions on the label.

After you have repaired the damaged areas of the window sill, it's important that you protect the area. Apply a water-resistant sealant to the wood. Sikkens, for example, is a great product to apply.

You can also use an epoxy filler with two parts to shield the wood from further damage. This product is easy to apply and gives an excellent finish. It is important to follow the instructions on the label. When the epoxy filler is dry you can sand the surface of the wooden. Start with a rough sandpaper then move on to more smoother grades.

The last thing you want to do is to make the area that has been damaged by expose it to more water. It is therefore a good idea to cover the area that has been repaired with an oil-based primer that will protect it from moisture. After that, you can apply the wood sealant that is waterproof.

It won't open

A window that won't open can be caused by many factors. Wood frames can warp in wet weather, the house might have sunk or someone may have nailed it shut for security reasons. With a bit of patience and the right tools you can open most stuck windows.

Accumulated debris or gunk can be a major reason of the window not opening. Acme Glass notes that dirt and grime builds up over time on hinges, sliding tracks and locks. Additionally, metal hardware is prone to rust when it comes into contact with humidity or direct sunlight. Spraying grease on these areas can help prevent oxidation, and ensure that your windows are operating well.

The pulleys that raise or lower the window may be loosened, or break. These components may lose tension and become obstructed particularly when the window is two or more stories above the ground.

If you have trouble opening a door, window doctor Near me try using a pry-bar to gently open the door. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to scratch the wood or the window. Try running a hairdryer along the frame's edges for several minutes. This will warm the wood, making it easier to move.

A broken spring could be the reason for a window that won't lift or lower. You will need to consult the owner's manual for additional information depending on who made your windows.

If you've tried cleaning and lubricating the moving components on your windows, but they aren't opening, it's probably time to replace the windows. Homespire Windows & Doors provides energy-efficient replacement windows. Don't let the windows in your home go from being functional to unusable. A window that isn’t properly shut could leave your home vulnerable for water damage and burglary. Contact our team today for more information about our replacement windows and our services!